Im working with an old reprap cotroled directly with an Laptop with cura. Filament is RS-Pro (2325395) Pla though. Open around 4 weeks ago but i have this problem in some capacity since i have this Filament. Before i had some really old pla which snapped all the time because it wss so brittle. Is this really just shitty Filament? Help/ Insight would be much appreciated.
Edit: solved. Disabling the retraction worked (as a temporary fix). The Spring of my extruder is too strong so my extruder was eating my filament especially in high retraction areas. The results with my old and hard filament were better because it was so hard the extruder didn't eat it. Picture is in the comments. Thanks everyone for your help.
Print i did immediately before. Main differences no supports and less Variationen in horizontal Crosssection ?
Definitely looks like you have some extrusion issues here. Check if the nozzle is partially clogged and that the extruder isn't skipping.
Exruder skipping would fit because I feel like it's happening more if the layer is multiple small sections (like between the holes in the original picture) But because I thought I have nice tooth marks there should be no skipping, but many its to much pressure. https://files.catbox.moe/1xgz70.jpg