You have a lot of possible options here.
If everything is ok, as someone else said, it's maybe a X twist -> https://docs.vorondesign.com/community/troubleshooting/bryansj/twisted_x_extrusion_diagnostics.html
Checked Cad > NanoCad > 1 year subscription > fail
April's fool probably :/
There's a theft problem in the neighborhood. Postman put the package and lock it after. It's in the front porch as you can see.
3 squeeze squeeze clamp and a little Brad nailer
Well, OTA update may be a bad idea. USB Key is good enough for anything and don't rely to a server. For your radio problem, it would solve it.
That's a multifile split for when we needed to upload them to places where a max upload limit was set. You need to select all and unzip them. Your un zipper should be able to find the pattern and unzip as one. I don't think you will be able to do anything if you unzip one by one
I like it for brainstorming while debbuging, finding funny names, creating stories "where you are the hero" for the kids or things that don't impact if it's hallucinating . I don't trust it for much more unfortunately. I'd like to know your uses cases where it works. It could open my mind on things I haven't done yet.
DAoC is fun, playing on some freeshard (eden actually, started one week ago, good community)
Well I asked some questions yesterday about classes of DAoC game to help me choose a starter class. It totally failed there attributing skills to wrong class. When poking it with this error it said : you are right, class x don't do Mezz, it's the speciality of class Z.
But class Z don't do Mezz either... I wanted to gain some time. Finally I had to do the job myself because I could not trust anything it said.
Start to spread into your friends/parents/kids place and send them virtual files to print :p
Two printers will always beat one printer. Upgrading your ender 3 will be a money pit if you want something that does same as last generations printers.
An designed enclosed printer will let you use ABS that is to my mind one of the best plastics I use.
I don't know for Creality K1/K2 though.
Heat soak should not change what you have here. During the heat soak, machine expands a little. You will get a more usefull Z / mesh when the machine gets to equilibrium.
If you still have problems after that, it's probably a X twisted, see the linked document above. Unfortunately I do not have much time to dig into your configs.
I don't have any experience with beacon. I use Tap or Klicky. With a twisted X, as tap use the nozzle, it should work even with a twisted X