3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
TPU will be nearly impossible for your kiddo to destroy. ASA/ABS are rugged, but if your print has thin surfaces it's less strong in my experience than PETG.
I didn't find TPU hard to print personally, just go slow and turn retraction way down or completely off. It will string pretty good, but most slicers have a setting to avoid crossing perimeters that will keep it in check. The only thing I would be wary of is ending up with a floppy print, so make sure the part has some structure.
Don't forget about material wear due to UV radiation. ASA is good for outdoors projects, rugged, not as toxic and UV degradation is minimal.