I'm not gonna lie, between the dirty camera lens and the color of the filament, I can't tell wtf is going on in this pic at all
this post was submitted on 05 Jul 2023
12 points (100.0% liked)
3DPrinting
17491 readers
180 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
would this be under extrusion? but why would it only happen to one side? it keeps happening on different prints. i added cardboard sides to my ender 5 pro but it only seems to have negligibly helped. i tried upping the flow rate on the printer to 115 (??) and it seems to have helped some but now im stringing more.
would this be under extrusion? but why would it only happen to one side? it keeps happening on different prints. i added cardboard sides to my ender 5 pro but it only seems to have negligibly helped. i tried upping the flow rate on the printer to 115 (??) and it seems to have helped some but now im stringing more.
some questions- I'm not really sure I have a firm grasp of what's happening... can you provide more pictures with different angles? and maybe some nifty circles or something so we know what you're looking at?
I do see what might be some underextrusion going on in the top infil near the upper half (above the center hole?) that I don't see in the bottom half of that same infil. If your bed isn't perfectly level, that could cause that. (as the high side would squish the filament a bit more.
the other thing that's standing out is the not-solid infill has the almost molten appearance of being too hot? that could definitely just be the picture, mind you, but if you haven't, I'd run a temp tower test. I like this model,
Here's hopefully a better picture. It's the bottom of the pic. One side appears mostly fine but with some blemishes. The bottom which should have the same texture looks very rough like filament is missing.