Flexaris

I'd like to know if anyone has succesfully flashed a board using their own FTDI chip and not a commercial debug probe.

I want to get into using Rust and I have these STM-based boards where I put an FTDI chip on them so I get a convenient USB-port for power and debug and flashing. I'd really like to get some Rust-software running but I've just hit walls so far with flashing the boards. They work fine when using platformio/openocd and C++ but nothing has worked so far for using "cargo embed" even though it seems to find the FTDI chip correctly and start flashing but then times out.

I'd love to know if anyone has a similar setup working or can give tips on what I could try.

I'm changing the PTFE in my heatbreak, I didn't realize these seem to be consumables. It started causing blockage.

A guy sent me a piece of PTFE from his Prusa MK3S+ that I could try as i was having trouble finding any PTFE quickly.

I realized I couldn't just cut a piece and put it in, that caused a lot of filament leakage and underextrusion. The end of the PTFE toward the nozzle was a bit jagged and I believe that's where the leakage happened. Now I'm wondering how the heatbreak and nozzle normally interface inside the heatblock, should they be touching? Should the PTFE protrude a bit from the heatbreak so there's a bit of pressure against the nozzle when I screw it in?

This was the last object I worked on before I took a break. I think I got a total of about 8 hours of HaRGB. I used an NEQ6 mount and William Optics Zenithstar 73