schizo

joined 9 months ago
[–] schizo@forum.uncomfortable.business 1 points 5 hours ago (1 children)

I'm sorry, but is that porn or a Tinder profile?

Basically, think ChatGPT

....so I can get all the Pussy in Bio in one place now?

[–] schizo@forum.uncomfortable.business 33 points 1 day ago* (last edited 1 day ago) (3 children)

lot of people from the US with gas grid (which we don’t really have around here), is it really so that your Joe Average can’t tell the difference between 1kWh of heat produced by gas compared to electricity

Right, because for most people gas is metered and sold by the CCF, and not converted into kW at any point in the chain.

So I know i used 30ccf last month, but there's zero indication what that is in kW, because we usually don't convert between the meter (which is volumetric) and the billing, which could be anything but why bother?

[–] schizo@forum.uncomfortable.business 19 points 1 day ago (1 children)

Installed yes, but the OOBE that runs (assuming the OEM didn't fuck it up) is more or less the same as a retail install: you have to add the account, untick the 300 'yes, please spy on me' boxes, and tell it that you do not want office 14 times.

100% this.

If you did a venn diagram of 'Worst possible implementation' and 'What Mastodon Did' you'd just have a circle.

[–] schizo@forum.uncomfortable.business 8 points 3 days ago* (last edited 3 days ago)

Don't let it connect to the wifi/internet?

I mean, sure, you have to do the SD card shuffle, but it'll guarantee you don't end up having to deal with this.

If you have a more advanced set of network hardware (which it doesn't sound like you do) you could add a firewall rule to block traffic from the LAN IP of the printer, or for something like Unifi, simply block internet access entirely. But, even then, if you screw it up now or in the future, surprise software updates will happen.

And they also had the turn-into-a-zombie plague event when Wrath launched, too.

As I recall, that mostly just made everyone rage because the assholes running around spreading it everywhere were just annoying the crap out of everyone and the general thought is they just needed to fuck off and find something else to do.

Or, basically, Covid.

CU and the lack of federal public funding for elections (by which I mean the state funds the campaigns of those who want federal offices) basically resulted in the US political class ending up fully in the pocket of the corporations.

That's what absolutely destroyed our ability to elect anyone other than what the corporate doners want, and thus you end up with nothing but corporate-friendly politicians, and thus a whole bunch of people who have no problem with facism and well, here we are.

[–] schizo@forum.uncomfortable.business 14 points 1 week ago (2 children)

I seem to clearly remember a story from the Bible about this, but perhaps they've simply skipped that part during their reading?

This is also a royal pain if you're into retro computers and want anything from like 2001-2004, because damn near every single motherboard from those eras need to be recapped, like, without exception. Either they're dead, or they will be soon.

Super annoying to get a thing you want to play with and the first thing you have to do is replace 20 caps and spend 3 hours doing it before you can even see if it would otherwise even work, lol.

I had a discussion about using the Slashdot style voting rather than the Reddit style.

It not only has the additional tag, it has the max "upvote" display limit of 5, and the display code will expand and promote the best rated comments, while hiding the garbage.

I think comments on most forums would benefit from there being no 'big upvote' number to chase, as well as making the highest rated comments in a thread of say, 200, more obvious.

 

So, after like 8 months of dumbphone only, I've given up.

It wasn't one majorly annoying thing, but just a non-stop death by a thousand cuts. Modern life really requires at least possession of one of these stupid little rectangles, and if you don't have one, you get slowly nibbled to death by the ducks of modernity.

So, rather than redouble my efforts to bend the world to dealing with me wanting to be a bit of a luddite weirdo, I've given up and just..... bought an iPhone SE and paired it with an Apple Watch 8 I already had.

See, the thing I really didn't consider is that I pretty much already had the ideal dumbphone: this AW8 is a cellular version.

It does phone calls, text messages, and has sufficient ties to modern services (music, podcasts, audiobooks, maps, etc.) that it is, by itself, a 60% solution. And just for perfect clarity: there's a lot of things wrong with the watch that make it not an ideal device, with the biggest one being really not fantastic battery life.

For everything the watch doesn't do, I also have the phone, but the phone isn't strictly required, and I can simply leave it at home when I don't want to deal with all the modern smartness and just rely on the watch.

For sure, it's not a cheap solution since an iPhone and a cellular watch is a giant investment even if you go for the "cheapest" versions, and I'm paying for two cellular plans (though, with US Mobile it's $96/year for each so, relatively speaking, still pretty cheap).

 

Made this mostly because I've found putting RSS feeds into Lemmy useful since my doom-scrolling has reduced to just Lemmy and figured I'm probably not the only person that'd find this useful.

It's pulling 6 RSS feeds that provide free games for Steam, Gog, Epic, and Humble.

Nothing shockingly world-changing, but hey, free games.

!freegames@forum.uncomfortable.business

1
Laptop for Linux use (forum.uncomfortable.business)
 

So I'm looking for a laptop, but before you downvote and move on, I've got a twist: I'm looking for a laptop with Linux support that's going to intentionally be console-only and rely on TUIs to make a lower-distraction device.

I was looking at older Thinkpads with 4:3 screens and the good keyboard before Lenovo went all chicklet with them, but I'm kinda concluding they're both way too expensive AND way too old to be a reasonable choice at this point.

A X220 or T40-whatever would be great and be the perfect aesthetic, but they're expensive, hard to find parts for, and using enough crusty old shit that this becomes yet another delve into retro computing and not one into practical, useful computing which is the goal here.

So, anyone have any recommendations of any devices in the last decade that have a reasonable keyboard, screen, use modern enough components that you can source new drives and RAM and batteries and such, and preferably aren't coated in a coating that's going to turn to sticky goo?

Thin(ner) and light(er) would be nice, but probably not a dealbreaker if the rest of the pieces align. This will be almost entirely used at a table for writing and such.

 

So not entirely music related, but my don't-use-reddit policy and this looking like the closest not entirely dead community has led me to post sooo...

I have an audio question about recording levels. I'm doing voice-over stuff for some really bad Youtube videos I'd like to make and it never sounds remotely good.

I get that the recording volume should be just the green side of clipping, but how do you take a track, and then add it to other tracks and balance the whole thing to not sound like ass?

It always seems that it's either too loud or too quiet and I'm baffled as to how to tweak the mix correctly so that things sound right.

 

Basically, the court said that algorithmically selected content doesn't qualify for Section 230 protections, which could be a massive impact to every social media platform out there that has any sort of algorithm selecting content, which, well, is all of them.

Definitely something that's going to be interesting watching play out.

 

So I've got a home server that's having issues with services flapping and I'm trying to figure out what toolchain would be actually useful for telling me why it's happening, and not just when it happened.

Using UptimeKuma, and it's happy enough to tell me that it couldn't connect or a 503 happened or whatever, but that's kinda useless because the service is essentially immediately working by the time I get the notice.

What tooling would be a little more detailed in to the why, so I can determine the fault and fix it?

I'm not sure if it's the ISP, something in my networking configuration, something on the home server, a bad cable, or whatever because I see nothing in logs related to the application or the underlying host that would indicate anything even happened.

It's also not EVERY service on the server at once, but rather just one or two while the other pile doesn't alert.

In sort: it's annoying and I'm not really making headway for something that can do a better job at root-cause-ing what's going on.

 

Just got an email thanking me for being a 5-node/free user, but Portainer isn't free and I need to stop being a cheap-ass and pay them because blah blah economic times enshittification blah blah blah.

I've moved off them a while ago, but figured I'd see if they emailed EVERYONE about this?

A good time to ditch them if you haven't, I suppose.

 

I'm wanting to add a bunch of energy monitoring stuff so I can both track costs, and maybe implement automation to turn stuff on and off based on power costs and timing.

I'm using some TPlink based plugs right now which are like, fine, but I'm wanting to add something like 6 to 10 more monitoring devices/relays.

Anyone have experience with a bunch of shelly devices and if there's any weird behavior I should be aware of?

Assume I have good enough wifi to handle adding another 10 devices to it, but beyond that any gotchas?

view more: next ›