As a homeowner it's often difficult to find someone who will do good work and not rip me off. I usually just end up figuring out how to do a lot of work myself, but I'm busy so projects get delayed. It's encouraging to read a story like this. I hope someday I can find someone like yourself to build a relationship with to get more updates done around the house.
Casual Conversation
Share a story, ask a question, or start a conversation about (almost) anything you desire. Maybe you'll make some friends in the process.
RULES (updated 01/22/25)
- Be respectful: no harassment, hate speech, bigotry, and/or trolling. To be concise, disrespect is defined by escalation.
- Encourage conversation in your OP. This means including heavily implicative subject matter when you can and also engaging in your thread when possible. You won't be punished for trying.
- Avoid controversial topics (politics or societal debates come to mind, though we are not saying not to talk about anything that resembles these). There's a guide in the protocol book offered as a mod model that can be used for that; it's vague until you realize it was made for things like the rule in question. At least four purple answers must apply to a "controversial" message for it to be allowed.
- Keep it clean and SFW: No illegal content or anything gross and inappropriate. A rule of thumb is if a recording of a conversation put on another platform would get someone a COPPA violation response, that exact exchange should be avoided when possible.
- No solicitation such as ads, promotional content, spam, surveys etc. The chart redirected to above applies to spam material as well, which is one of the reasons its wording is vague, as it applies to a few things. Again, a "spammy" message must be applicable to four purple answers before it's allowed.
- Respect privacy as well as truth: Don’t ask for or share any personal information or slander anyone. A rule of thumb is if something is enough info to go by that it "would be a copyright violation if the info was art" as another group put it, or that it alone can be used to narrow someone down to 150 physical humans (Dunbar's Number) or less, it's considered an excess breach of privacy. Slander is defined by intentional utilitarian misguidance at the expense (positive or negative) of a sentient entity. This often links back to or mixes with rule one, which implies, for example, that even something that is true can still amount to what slander is trying to achieve, and that will be looked down upon.
Casual conversation communities:
Related discussion-focused communities
I've worked in IT for 16+ years and have not managed to rise to any worthwhile position (still doing helpdesk). If I had your gumption and belief in myself I could make it, I would do the same thing.
Unfortunately, I'm a coward and convinced I'm a talentless hack, so I'll be working for crumbs until pension age (if I make it that long, that is).
I applaud your entrepeneurship and confidence and wish you all the best and all the success you deserve!
I was a nervous wreck for months while getting the preparations done to start up. Never been that anxious before. I just had to do it because I knew I'd regret if I didn't.
assume the helpdesk job will be gone soon anyway with AI, start seeking out good people who could use good people.
everyone has been raised to be a coward, try anyqay. ideally you want to find something remote, so you can do it from anywhere.
I doubt this because people will call helpdesk expecting an actual person, not a bot that may or may not give you false information. Giving an AI admin permissions is also a scary thought.
That's a great motivational story! I wish only the best success for you!
I've always wondered about the floor that goes under the floor. It's nice to see it in your photo
It's the original vinyl flooring in this case and even though it's not generally recommended to lay "luxury vinyl planks" on top of it, it usually is not a problem and the customer didn't want me to tear out the old flooring due to how much extra work that would cause.
But the new stuff is not vinyl, right?
It is. The problem is that vinyl carpet floor can be too soft for vinyl planks and thus in the worst case the seams might open up. Laying vinyl planks on laminate or parquet wouldn't be an issue because it's a hard surface.
If you haven't already, get it in writing that the customer was informed about the possibility, or at least that you did it "per customer decision" or something like that.
It wouldn't really matter. If I knowingly install something "wrong" it's on me even if it's how the customer wanted it. I wouldn't agree to something like this if I was worried about it causing issues in the future. After 2 years it's no longer on my responsibility.
If I knowingly install something “wrong” it’s on me even if it’s how the customer wanted it.
For my fellow Americans confused by this, OP mentioned that he lives "on the opposite side of the planet" from Texas, in a country that apparently actually has real consumer protection laws.
This is also true in the US, at least where I live.
I hope he takes your advice, but he might have to learn the hard way to CYA. He might live in an area where the people are so desperate for good work that they don't act like that too.
Yes it can be hard to learn that nice people can be talked by friends into suing over the consequences of their own choices. I fear confrontation so I'd just quietly add a few words to the final invoice, in the description of the work, so they will have signed off on it.
Although even emails or texts would cover it as well.
As someone who also recently layed a lot of vinyl planks: Take care of your back, otherwise good luck! 😊
If the flooring is that flush on the other side, I applaud you. I did my basement floor myself to save some money and it was rough. Measured a small gap to leave some wiggle room but it's pretty fuckin bad in places.
Also if you're good at what you do (and it certainly looks like you are), word of mouth will be your lifeblood in a small town. My dad was a small business owner (2 employees eventually, after years and years of being solo) and the vast majority of his work was word of mouth and returning customers.
If the flooring is that flush on the other side, I applaud you.
I just got done fixing some 2 1/4" strip hardwood flooring in a closet, and even over a run of only about 5" it got about 1/2" crooked by the time I got to the closet side wall. And that's despite (or maybe because of) weaving it in with the flooring outside the closet opening!
(Either that or my wall is crooked, which is also a possibility, LOL.)
Congrats! People recognize good, honest work. Your business is definitely on the right track.
Do you by chance live in Dallas? I've got a front door that needs serious adjustment and got absolutely swindled on trying to install a generator last year. Haven't been able to find anybody to work on either.
I used Angie's list for the door several months ago, paid four hundred dollars, and watched my door come off its hinges two weeks later.
Unfortunelately no, I live on the opposite side of the planet
Awesome! No idea where you live but if you were near me I’d hire you. I always try to do little projects but end up failing at them because I suck at working with my hands lol.
I applaud your courage. What interesting jobs you've done and what skills other than plumbing you are confident in doing rn?
I've only been doing this for around 6 months so I haven't had any that special jobs so far but I did a small kitchen remodel to one customer where I tore down the old and build a new one for her which was quite enjoyable job.
My favourite jobs are ones that require creativity and problem solving. When ever I can fix something instead of replacing it is fun. This is a recent example of such job:
It's honestly easier to list what I don't do which is building something bigger than a shed, electric work, work inside tanks / wells, challenging tree fellings, jobs that require more than one person such as roofing, asbestos demolition and jobs where I need to deal with refrigerants.
Hell yeah. I love this. Best of luck out there.